La unidad de control de cámara AK-HCU200E permite configurar de forma económica un sistema de transmisión por fibra óptica de larga distancia y alta calidad. La transmisión por fibra óptica admite señales de vídeo sin comprimir a lo largo de una distancia de aproximadamente 1.200 metros entre la cámara y la unidad de control. Esta compacta y ligera unidad mide 2U de altura y se puede montar en rack. Asimismo, la AK-HCU200E integrará* un conversor que admite 720p/59,94 y 720p/50.
- Images
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
SERVICIO GENERAL Y DESCARGAS CONTACTAR CON EL SERVICIO DE ASISTENCIA TÉCNICAPlease see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
SERVICIO GENERAL Y DESCARGAS CONTACTAR CON EL SERVICIO DE ASISTENCIA TÉCNICAThere are currently no key services available.
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
SERVICIO GENERAL Y DESCARGAS CONTACTAR CON EL SERVICIO DE ASISTENCIA TÉCNICAThere are currently no other services available.
Specifications
| Peso | Approx. 6.6 kg (approx. 14.6 lb) |
|---|---|
| Dimensions (W x H x D) | 424 mm x 88 mm x 400 mm (16-11/16 inches x 3-7/16 inches x 15-3/4 inches) Excluding protrusions |
| Temperatura de funcionamiento | 0 °C to 40 °C (32 °F to 104 °F) |
| Power Supply | 100 V to 240 V AC, 50Hz/60 Hz |
| Power Consumption | 170 W (Without CAMERA connected: 32 W) |
| Operating Humidity | 10 % to 90 % (no condensation) |
| Reference Input | 1 line (1 loop-through line) Black burst/tri-level*3 |
| Video Output | HD-SDI/SD-SDI: 4 lines (2 lines shared with picture monitor output*1) Analog composite: 1 line (1 line shared with picture monitor output*1) |
| Output Format | 1080/59.94i, 1080/50i, 1080/29.97PsF*2, 1080/25PsF*2, 1080/23.98PsF*2, 720/59.94p, 720/50p |
| Communication | Intercom input/output: 2 lines (1/2*1) (0 dBm, 600 Ω, RTS/4W*1) PGM: 1 line, input (0 dBm/600 Ω) Tally input: Red, Green, 1 input each |
| Return Input | HD-SDI/SD-SDI: 2 lines (switched depending on the setting) VBS: 1 line |
| Prompter Input | 1 line, Analog composite |
| Intercom | XLR, 5-pin, female Input: –55 dBu to –10 dBu Output: 100 mW (max.) |
| LAN Port | 1 line (8-pin, RJ45) |
| Note | *1: Depending on the setting, only one of them can be selected at one time. *2: The 1080/29.97PsF, 1080/25PsF and 1080/23.98PsF formats must be selected at the camera. *3: The black burst signal and tri-level sync signal of the reference input are recognized automatically. |
| Capacity for Supplying Power to a Camera | 190 V DC, 0.6 A |
| Microphone Output | 2 lines (XLR, 3-pin, male), 0 dBm/600 Ω |
| ROP Interface | RS-422, 1 line, 12 V output |
| MSU Interface | RS-422, 1 line, GPI for control |
