BACK TO PRODUCT CATEGORY
AK-UCU500
Principales características

Ofrece una salida paralela UHD y HD/SD, salida HD de la cámara (3G-SDI): 1080/59.94p, 50p, 59.94i, 50i, 29.97psF, 25psF, 23.98p a través de 59.94i, 720/59.94p, salida50p UHD de CCU: 2160/59.94p, 50p, 29.97p, 29.97psF, 25p, 25psF, 23.98p, salida SD 23.98psF de CCU: 480/59.94i, 576/50i

Transmisión por fibra óptica de señales de vídeo sin comprimir y alimentación de la cámara a una distancia de 2.000 m

Funcionamiento variable con función trunk avanzada

Compatible con streaming IP

De camerabedieningseenheid AK-UCU500 (CCU) ondersteunt zowel 4K- als HD-formaten, zodat gebruikers tegen lagere kosten camerasystemen van hoge kwaliteit met transmissie via glasvezel over lange afstanden kunnen configureren

Unidad de control de cámara individual montada en rack 2U que ofrece una salida paralela UHD y HD/SD a lo largo de una distancia de 2.000 m

Unidad de control de cámara inclinada AK-UCU500

Unidad de control de cámara AK-UCU500 

Funciones agregadas o mejoradas

   

Admite funciones HDR

   

Para salida 4K-HDR, GAMUT (= gama de colores: NORMAL/WIDE-G) con menú para conmutar

   

La unidad de control de la cámara AK-UCU500 Panasonic permite configurar de forma económica un sistema de transmisión por fibra óptica de larga distancia y alta calidad.

Especificaciones:

  • Transmisión por fibra óptica de señales de vídeo sin comprimir (incluido retorno de vídeo) a lo largo de una distancia de aproximadamente de 2.000 m entre la cámara y la unidad de control
  • Esta compacta y ligera unidad mide 2U de altura y se puede montar en bastidor
  • Formatos admitidos con la AK-UC3000:

    2160/59,94p, 50p, 29,97p, 29,97psF, 25p, 25psF, 23,98p, 23,98psF
    1080/59,94p, 50p, 59,94i, 50i, 29,97psF, 25psF, 23,98p sobre 59,94i
    720/59,94p, 50p
    480/59,94i, 576/50i

  • Formatos admitidos con la AK-HC5000:

    1080/59,94p, 50p, 59,94i, 50i, 29,97psF, 25psF, 23,98p sobre 59,94i, 720/59,94p, 50p
    480/59,94i, 576/50i
    1080/239,76p, 200p

  • Admite transmisión en flujo a través de IP (cable LAN RJ45, opción futura)

  • Funcionamiento variable con función troncal y de bucle avanzada.

     CCU -> CAM: HD-SDI x2 y analógica x2
     CAM -> CCU: 1 HD-SDI
     Bucle:  Prompter y HD-SDI, TRUNK, RET1, G/L

  • Posibilidad de utilizar una tarjeta de memoria SD para guardar archivos del usuario y actualizar la versión de firmware

  • Entrada/salida: SDI OUT x8, Retorno de vídeo x4, Teleprompter x2, Conexión troncal de datos x2, 1000Base-T x1

panasonic, professional camera, control unit, 4k camera

 

MOSTRAR MÁS

Product
Image Data
Technical
Operating Instructions
Firmware

Service and Support
  • Broadcast & ProAV Operating Manual Database
    Broadcast & ProAV Operating Manual Database
    Link to the Panasonic global Operation Manual Database for Broadcast & ProAV Products
    Mon, 12/02/2018 - 13:50
    Download File

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

SERVICIO GENERAL Y DESCARGAS CONTACTAR CON EL SERVICIO DE ASISTENCIA TÉCNICA

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

SERVICIO GENERAL Y DESCARGAS CONTACTAR CON EL SERVICIO DE ASISTENCIA TÉCNICA

There are currently no key services available.

Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.

SERVICIO GENERAL Y DESCARGAS CONTACTAR CON EL SERVICIO DE ASISTENCIA TÉCNICA

There are currently no other services available.

Specifications

Power Supply AK-UCU500P/AK-UCU500PS: 100 V - 120 V AC, 50 Hz/60 Hz AK-UCU500E/AK-UCU500ES: 100 V - 240 V AC, 50 Hz/60 Hz
Power Consumption 500 W (Without camera connected: 70 W)
Capacity for Supplying Power to a Camera 240 V AC (tolerance: 5%), 1.46 A , 50 Hz/60 Hz
Operating Temperature 0°C to 40°C (32°F to 104°F)
Humidity 10% to 90% (no condensation)
Weight Approx. 8.8 kg (19.4 lb)
Dimensions (W x H x D) 424 mm x 88 mm x 401 mm (16-5/8 inches x 3-7/16 inches x 15-13/16 inches) (excluding protrusions)
Video Output 3G/HD/SD-SDI: 7 lines (embedded audio is supported only for HD signals) HD/SD-SDI: 1 line (shared with picture monitor output*1 ; embedded audio is supported only for HD signals) Analog composite: 2 lines (1 line shared with picture monitor output*1)
HD Trunk Output HD-SDI: 1 line (cannot be used in UHD/HS mode)
Return Input 3G-HD/HD/SD-SDI: 4 lines (RET1 input has active-through output) Analog composite: 1 line
Prompter Input HD-SDI: 1 line (with active-through output) Analog composite: 2 lines (through output of 1 and input of 2 share the connector*1) It is not terminated when the unit is turned OFF. No through output.
Reference Input BB (black burst) / tri-level*2: 1 line (automatic termination, connect to upper connector; BB signal and tri-level signal automatically recognized, with loop-through output)
Microphone Output 0 dBm/600 ohm, 2 lines (XLR, 3-pin, male)
Communication Intercom input/output (ENG / PROD, 0 dBm, 600 Ω (4 W) / 1 V [p-p], 200 Ω (RTS), 4 W / RTS / CLRCOM) : 2 lines*1 PGM input (0 dBm/600 Ω) : 2 lines Tally input (red, green, yellow) : 1 input each
AUX WFM control 6-bit (open collector output, terminal shared with camera microphone gain setting*1) Camera microphone gain setting input 5-bit (photo-coupler input, terminal shared with WFM control*1) Down-conversion system setting input 2-bit (photo-coupler input)
Trunk RS-422 / RS-232C 2 lines*1
Front ROP RS-422 1 line, 16 V DC output (only one of this and REAR ROP can be selected at one time via the menu or the [ROP FRONT/REAR] selection switch on the front panel)
Rear ROP RS-422 1 line, 16 V DC output (only one of this and FRONT ROP can be selected at one time via the menu or the [ROP FRONT/REAR] selection switch on the front panel)
MSU RS-422 1 line, GPI for control
LAN Trunk LAN connection with camera side via an optical cable*3 1 line, 100BASE-T, 1000BASE-T
LAN Personal computer connection for distribution via the Web*3 1 line, 10BASE-T, 100BASE-TX (use a crossover cable when connecting directly with a personal computer)
Note *1: Depending on the setting, only one of them can be selected at one time. *2: The BB (black burst) signal and tri-level sync signal of the reference input are recognized automatically. *3: IP video cannot be transmitted when [CCU MODE] is set to [2160/23.98p], [2160/23.98PsF], [1080/23.98p], or [1080/23.98PsF]. *4: Can be provided from CCU