Sector público 
Servicios sanitarios 
Servicios 
Transporte y Logística 
Sector industrial 
Ocio 
Retail 
Educación 
Proyector de instalación fija de la categoría de 10.000 lúmenes Reproducción de colores impresionantes y proyección altamente flexible para museos, exposiciones y señalización digital 2 lámparas - Objetivo intercambiable - Amplificador RGB dinámico - Digital Link
- Calidad de imagen excelente con un nuevo control de colores naturales y amplificador RGB dinámico
- Sistema de lámpara dual con modo Lamp Relay que permite un funcionamiento ininterrumpido
- Brillo de 8.500 lúmenes
- Resolución WXGA (1.280 x 800)
- Relación de contraste de 10.000:1 (en modo de alto contraste)
- Edge Blending
- Color Matching
- Amplificador RGB dinámico
- DIGITAL LINK
- ompatible con 3D
Nuestro innovador sistema de lámpara doble, con su nueva bombilla, contribuye al tamaño compacto de la carcasa, al tiempo que proporciona 8.500 lúmenes de brillo en modos de funcionamiento 220-240 V de CA. En modo Lamp Relay, el sistema elimina también cualquier interrupción si una lámpara falla y permite proyecciones constantes.
El amplificador RGB dinámico de Panasonic también ofrece imágenes de alta calidad junto a un excelente brillo y una magnífica reproducción de colores. De forma similar, el procesador Detail Clarity Processor 3 aporta profundidad y claridad a los detalles.
La función Iris dinámico de Panasonic utiliza un mecanismo de apertura de vinculación de escenas para conseguir un contraste extraordinario de 10.000:1 sin mermar el brillo. Esta característica ayuda a reproducir negros más intensos y ricos, y genera imágenes con texturas más detalladas.
En términos de mantenimiento y fiabilidad, un bloque óptico resistente al polvo impide la entrada de partículas para mantener la calidad de las imágenes y un nuevo mecanismo de refrigeración, que incluye un bloque de disipación de calor mediante un conducto térmico, reduce el desgaste y el deterioro del dispositivo. En combinación con un ciclo de sustitución de la lámpara de hasta 3.000 horas, el proyector ofrece menores costes de propiedad y mantenimiento.
Para optimizar la integración con otros sistemas, la compatibilidad DIGITAL LINK permite la transmisión de señales de audio y control, HDMI y vídeo sin comprimir a través de un cable LAN.
Tecnología
Click an icon to find out more about the technology used
- Images
-
Download image - 629.65 KB
-
Download image - 66.02 KB
-
Download image - 74.69 KB
-
Download image - 434.34 KB
-
Download image - 1 MB
-
Download image - 73.3 KB
-
Download image - 571.86 KB
-
Download image - 49.29 KB
-
Download image - 630.57 KB
-
Download image - 126.11 KB
-
Download image - 558.26 KB
-
Download image - 49.37 KB
-
Download image - 559.11 KB
-
Download image - 48.87 KB
-
Download image - 552.38 KB
-
Download image - 47.85 KB
-
Download image - 521.66 KB
-
Download image - 46.12 KB
-
Download image - 534.53 KB
-
Download image - 150.31 KB
-
Download image - 576.3 KB
-
Download image - 53.03 KB
-
Download image - 821.75 KB
-
Download image - 450.44 KB
-
Download image - 692.87 KB
-
Download image - 369.73 KB
-
Download image - 771.3 KB
-
Download image - 462.81 KB
-
Download image - 1.25 MB
-
Download image - 80.95 KB
-
Download image - 74.04 KB
-
Download image - 183.93 KB
-
Download image - 63.12 KB
-
Download image - 992.95 KB
-
Download image - 215.34 KB
-
Download image - 63.63 KB
-
Download image - 524.25 KB
-
Download image - 66.01 KB
-
Download image - 428.71 KB
-
Download image - 3.98 MB
-
Download image - 532.54 KB
Accessories and Software
- Recomendado
- Opcional
-
Lenses -
Digital Interface Box -
DIGITAL LINK Switcher -
Ultra Short Throw Lens
-
Objetivo con zoom para proyectores DLP de 1 chipET-DLE085Factor de proyección 0,8-1,0:1 (WUXGA)
-
Objetivo con zoom para proyectores DLP de 1 chipET-DLE150Factor de proyección 1,3-1,9:1 (WUXGA)
-
Objetivo con zoom para proyectores DLP de 1 chipET-DLE250Factor de proyección 2,3-3,6:1 (WUXGA)
-
Objetivo con zoom para proyectores DLP de 1 chipET-DLE350Factor de proyección 3,6-5,4:1 (WUXGA)
-
Objetivo con zoom para proyectores DLP de 1 chipET-DLE450Factor de proyección 5,4-8,6:1 (WUXGA)
-
Objetivo de enfoque fijo para proyectores DLP de 1 chipET-DLE055Factor de proyección 0,8:1 (WUXGA)
-
-
Conm. DIGITAL LINK - Sencilla integración de control AVET-YFB200G2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.
-
Lente de proyección ultracorta para proyectores de 1DLPET-DLE035Enables large-screen projection from a short distance
-
Lamps
-
ET-LAD310ALámpara UHM de 380 W x 1
-
ET-LAD120Lámpara UHM de 420 W x 1
-
ET-LAD310AW
Lámpara UHM de 380 W x 2
-
ET-LAD120W
Lámpara UHM de 420 W x 2
-
ET-LAD120P
Lámpara UHM de 420 W x 1, Para modo vertical
-
ET-LAD120PW
Lámpara UHM de 420 W x 2, Para modo vertical
-
PT-DZ870/DW830/DX100 Operating Instructions (Spanish)Download pdf - 20.13 MBWed, 06/06/2018 - 01:36
ET-DLE105 Operating Instructions (Appendix) (English, French)Download pdf - 1.37 MBMon, 04/06/2018 - 09:52
ET-DLE170 Operating Instructions (Appendix) (English, French)Download pdf - 1.34 MBMon, 04/06/2018 - 09:54
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportPlease see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no key services available.
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no other services available.
Specifications
| Power Supply | 120-240 V AC, 10-5.2 A, 50/60 Hz |
|---|---|
| Power Consumption (120-240V AC, 50/60Hz) | 1,030 W (1,060 VA) (0.3 W with STANDBY MODE set to ECO, 3 W with STANDBY MODE set to NORMAL) |
| DLP™ Chip Panel Size | 16.5 mm (0.65 in) diagonal (16:10 aspect ratio) |
| DLP™ Chip Display Method | DLP™ chip x 1, DLP™ system |
| DLP™ Chip Pixels | 1,024,000 (1,280 x 800) x 1, total of 1,024,000 pixels |
| Lens PT-DW830K/DW830W | Powered zoom/focus lenses (1.8 - 2.5:1), F 1.7 - 1.9, f 25.6 - 35.7 mm |
| Lens PT-DW830LK/DW830LW | Optional powered zoom/focus lenses and fixed-focus lens |
| Lamp | 420 W UHM lamps (x 2) |
| Screen Size | 1.27 - 15.24 m (50 - 600 inches) (1.27 - 5.08 m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio)) (2.54 - 8.89 m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio)) |
| Brillo | 8,500 lumens (dual lamp, LAMP MODE: NORMAL) |
| Center-to-Corner Uniformity | 90% |
| Contraste | 10,000:1 (full on/full off, in dynamic iris 3 mode) |
| Resolución | 1,280 x 800 pixels(Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.) |
| Scanning Frequency (HDMI/DVI-D) | fH: 15 - 100 kHz, fV: 24 - 120 Hz, dot clock: 25 - 162 MHz |
| Scanning Frequency (RGB) | fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower |
| Scanning Frequency YPBPR (YCBCR) | 525i(480i): fH 15.75 kHz; fV 60 Hz, 625i(576i): fH 15.63 kHz; fV 50 Hz, 525p(480p): fH 31.50 kHz; fV 60 Hz, 625p(576p): fH 31.25 kHz; fV 50 Hz, 750(720)/60p: fH 45.00 kHz; fV 60 Hz, 750(720)/50p: fH 37.50 kHz; fV 50 Hz, 1125(1035)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125(1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125(1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125(1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125(1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125(1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125(1080)/50p: fH 56.25 kHz; fV 50 Hz |
| Scanning Frequency (Video/Svideo) | fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
| Optical Axis Shift | Vertical: +60% (powered), Horizontal: ±10% (powered); NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055. If using the ET-DLE030, the optical axis is fixed. |
| Keystone Correction Range | Vertical ±40° (±30° with the ET-DLE055/DLE085/DLE105.) Cannot be used when the ET-DLE030 is installed. |
| Instalación | Ceiling/floor, front/rear |
| Terminals HDMI In | HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only. |
| Terminals DVI-D In | DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only. |
| Terminals RGB 1 In | BNC x 5 |
| Terminals RGB 1 In R, G, B | R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. |
| Terminals RGB 1 In Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
| Terminals RGB 1 In S-Video Signal | Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms |
| Terminals RGB 2 In | D-sub HD 15-pin (female) x 1 |
| Terminals RGB 2 In R, G, B | R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. |
| Terminals RGB 2 In Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
| Terminals 3D Sync 1 In/Out | BNC x 1, 1.0 Vp-p, 75 ohms Input: TTL, high impedance. Output: TTL, max. 10 mA |
| Terminals 3D Sync 2 Out | BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA |
| Terminals Video In | BNC x 1, 1.0 Vp-p, 75 ohms |
| Terminals Serial In | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals Serial Out | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) |
| Terminals Remoter 1 In | M3 jack x 1 for wired remote control |
| Terminals Remoter 1 Out | M3 jack x 1 for link control |
| Terminals Remoter 2 In | D-sub 9-pin x 1 for external control (parallel) |
| Terminals LAN/DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only. |
| Power Cord Length | 3.0 m (9 ft 10 in) |
| Cabinet Materials | Molded plastic |
| Dimensions (W x H x D) PT-DW830K/DW830W | 498 x 200 x 556 mm (19 - 19/32 x 7 - 7/8 x 21 - 7/8 inches) (with supplied lens) |
| Dimensions (W x H x D) PT-DW830LK/DW830LW | 498 x 200 x 513 mm (19 - 19/32 x 7 - 7/8 x 20 - 3/16 inches) (without lens) |
| Weight PT-DW830K/DW830W | Approx. 18.3 kg (40.3 lbs) (with supplied lens) |
| Weight PT-DW830LK/DW830LW | Approx. 17.6 kg (38.8 lbs) (without lens) |
| Operation Noise | 40 dB (dual lamp operation, LAMP MODE: NORMAL), 35 dB (dual lamp operation, LAMP MODE: ECO) |
| Temperatura de funcionamiento | 0℃ - 45 ℃ (32℉ - 113 ℉) |
| Operating Humidity | 10% - 80% (no condensation) |
| Tecnología | 1-Chip DLP |
| Note | Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. *1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal) *4 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking). *5 With legs at shortest position. *6 Average value. May differ depending on models. *7 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in High Altitude mode) when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately 20% to protect the projector. *8 Operation range differs depending on environments. |
