Sector público 
Servicios sanitarios 
Servicios 
Transporte y Logística 
Sector industrial 
Ocio 
Retail 
Educación 
DLP de 1 chip de 8500 lúmenes, WUXGA
Calidad de imagen excelente con un nuevo control de colores naturales y amplificador RGB dinámico
Sistema de lámpara dual con modo de lámpara por relé que permite un funcionamiento ininterrumpido
Filtro ecológico que ofrece un ciclo de sustitución del filtro del aire de hasta 12000 horas
Relación de contraste de 10.000:1
Proyector de instalación fija de la clase de 10.000 lúmenes. Reproducción de colores impresionantes y proyección altamente flexible para museos, exposiciones y señalización digital. 2 lámparas - Objetivo intercambiable - Amplificador RGB dinámico - Ajuste geométrico, Digital Link
- Calidad de imagen excelente con un nuevo control de colores naturales y amplificador RGB dinámico
- Sistema de lámpara dual con modo Lamp Relay que permite un funcionamiento ininterrumpido
- Brillo de 8.500 lúmenes
- Resolución WUXGA (1.920 x 1.000)
- Relación de contraste de 10.000:1 (en modo de alto contraste)
- Edge Blending
- Color Matching
- Amplificador RGB dinámico
- DIGITAL LINK
- Compatible con 3D
MOSTRAR MÁS
Tecnología
Click an icon to find out more about the technology used
- Images
-
Download image - 629.65 KB
-
Download image - 66.02 KB
-
Download image - 74.69 KB
-
Download image - 434.34 KB
-
Download image - 62.72 KB
-
Download image - 1.19 MB
-
Download image - 874.26 KB
-
Download image - 703.66 KB
-
Download image - 47.13 KB
-
Download image - 78.76 KB
-
Download image - 571.86 KB
-
Download image - 49.29 KB
-
Download image - 630.57 KB
-
Download image - 126.11 KB
-
Download image - 558.26 KB
-
Download image - 49.37 KB
-
Download image - 559.11 KB
-
Download image - 48.87 KB
-
Download image - 552.38 KB
-
Download image - 47.85 KB
-
Download image - 521.66 KB
-
Download image - 46.12 KB
-
Download image - 534.53 KB
-
Download image - 150.31 KB
-
Download image - 576.3 KB
-
Download image - 53.03 KB
-
Download image - 821.75 KB
-
Download image - 450.44 KB
-
Download image - 692.87 KB
-
Download image - 369.73 KB
-
Download image - 771.3 KB
-
Download image - 462.81 KB
-
Download image - 312.4 KB
-
Download image - 254.78 KB
-
Download image - 2.17 MB
-
Download image - 2.11 MB
-
Download image - 69.32 KB
-
Download image - 50.77 KB
-
Download image - 317.49 KB
-
Download image - 82.8 KB
-
Download image - 63.12 KB
-
Download image - 1.42 MB
-
Download image - 87.08 KB
-
Download image - 859.91 KB
-
Download image - 100.31 KB
-
Download image - 871.67 KB
-
Download image - 102.26 KB
-
Download image - 1.03 MB
-
Download image - 1.18 MB
-
Download image - 56.36 KB
-
Download image - 80.15 KB
-
Download image - 1.25 MB
-
Download image - 1.19 MB
-
Download image - 81.29 KB
-
Download image - 78.61 KB
-
Download image - 1.19 MB
-
Download image - 879.54 KB
-
Download image - 73.67 KB
-
Download image - 1.23 MB
-
Download image - 118.02 KB
-
Download image - 992.95 KB
-
Download image - 215.34 KB
-
Download image - 63.63 KB
-
Download image - 524.25 KB
-
Download image - 66.01 KB
-
Download image - 428.71 KB
-
Download image - 3.98 MB
-
Download image - 532.54 KB
- Casos de Estudio
- Catálogos
-
Acortando las distancia en el maratón de LondresObjetivos de ultracorta distancia permiten proyecciones de alto brillo enel maratón de Londres -
Hydropolis: Un mundo inundado de tecnologíaLos proyectores PT-DZ870 y PT-DZ680 dan vida a la ciencia en el centro Hydropolis de Wrocław, en Polonia -
La tecnología LinkRay permite mejorar las visitas de los clientesEl Petersen Automotive Museum mejora las visitas de los clientes con la nueva tecnología LinkRay de Panasonic
-
ET-CUK10/CUK10P Catalog PDF (English)Catalog PDF: ET-CUK10/CUK10P
Accessories and Software
- Recomendado
- Opcional
-
Digital Interface Box -
DIGITAL LINK Switcher
-
Objetivo con zoom para proyectores DLP de 1 chipET-DLE085Factor de proyección 0,8-1,0:1 (WUXGA)
-
Objetivo con zoom para proyectores DLP de 1 chipET-DLE150Factor de proyección 1,3-1,9:1 (WUXGA)
-
Objetivo con zoom para proyectores DLP de 1 chipET-DLE250Factor de proyección 2,3-3,6:1 (WUXGA)
-
Objetivo con zoom para proyectores DLP de 1 chipET-DLE350Factor de proyección 3,6-5,4:1 (WUXGA)
-
Objetivo con zoom para proyectores DLP de 1 chipET-DLE450Factor de proyección 5,4-8,6:1 (WUXGA)
-
Objetivo de enfoque fijo para proyectores DLP de 1 chipET-DLE055Factor de proyección 0,8:1 (WUXGA)
-
Lente de proyección ultracorta para proyectores de 1DLPET-DLE035Enables large-screen projection from a short distance
-
Conm. DIGITAL LINK - Sencilla integración de control AVET-YFB200G2 x DIGITAL LINK (based on HDBaseT™ technology) terminals output uncompressed HD digital video, audio and command signals to two projectors/displays.
-
ET-CUK10_CUK10PET-CUK10 - Auto Screen Adjustment Upgrade Kit . Simple and easy adjustment Simple and easy adjustment for multi-screen projection or curved-screen...
-
Lamps
-
ET-LAD310ALámpara UHM de 380 W x 1
-
ET-LAD120Lámpara UHM de 420 W x 1
-
ET-LAD310AW
Lámpara UHM de 380 W x 2
-
ET-LAD120W
Lámpara UHM de 420 W x 2
-
ET-LAD120P
Lámpara UHM de 420 W x 1, Para modo vertical
-
ET-LAD120PW
Lámpara UHM de 420 W x 2, Para modo vertical
Marketing
Case Studies
Spec Sheets
Brochures
General
Logo Data
Product
Image Data
Spec Files
BIM
CAD Data
Technical
Operating Instructions
Technical Documents
Installation Manuals
Service and Support
-
La tecnología LinkRay permite mejorar las visitas de los clientesDownload pdf - 10.41 MBTue, 17/10/2017 - 09:23
-
PT-DZ870/DW830/DX100 Operating Instructions (Spanish)Download pdf - 20.13 MBWed, 06/06/2018 - 01:36
Geometry Manager Pro (Including ET-CUK10 / ET-UK20) (English)Download pdf - 10.71 MBWed, 28/02/2018 - 15:01
ET-DLE105 Operating Instructions (Appendix) (English, French)Download pdf - 1.37 MBMon, 04/06/2018 - 09:52
-
ET-DLE170 Operating Instructions (Appendix) (English, French)Download pdf - 1.34 MBMon, 04/06/2018 - 09:54
ET-CUK10 Operating Instructions (English, Japanese)Download pdf - 976.59 KBMon, 05/03/2018 - 09:01
ET-CUK10/CUK10P Operating Instructions (English, Japanese)Download pdf - 1 MBTue, 03/04/2018 - 14:15
-
Geometry Manager Pro (Including ET-CUK10 / ET-UK20) (English)Download pdf - 10.71 MBWed, 28/02/2018 - 15:01
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportPlease see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no key services available.
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
General service & downloads Contact technical supportThere are currently no other services available.
Specifications
Specification documents
| Power Supply | 120-240 V AC, 10-5.2 A, 50/60 Hz |
|---|---|
| Power Consumption (120-240V AC, 50/60Hz) | 1,030 W (1,060 VA) (0.3 W with STANDBY MODE set to ECO, 3 W with STANDBY MODE set to NORMAL) |
| DLP™ Chip Panel Size | 17.0 mm (0.67 in) diagonal (16:10 aspect ratio) |
| DLP™ Chip Display Method | DLP™ chip x 1, DLP™ system |
| DLP™ Chip Pixels | 2,304,000 (1,920 x 1,200) x 1, total of 2,304,000 pixels |
| Lens PT-DZ870K/DZ870W | Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f 25.6-35.7 mm |
| Lens PT-DZ870LK/DZ870LW | Optional powered zoom/focus lenses and fixed-focus lens |
| Lamp | 420 W UHM lamps (x 2) |
| Screen Size | 1.27 -15.24 m (50-600 inches) (1.27-5.08 m (50-200 inches) with the ET-DLE055 (16:10 aspect ratio)) (2.54-8.89 m (100-350 inches) with the ET-DLE030 (16:10 aspect ratio)) |
| Brillo | 8,500 lumens (dual lamp, LAMP MODE: NORMAL) |
| Center-to-Corner Uniformity | 90% |
| Contraste | 10,000:1 (full on/full off, in dynamic iris 3 mode) |
| Resolución | 1,920 x 1,200 pixels |
| Scanning Frequency (SDI) | 3G-SDI signal (RGB 4:4:4 12-bit/10-bit): SMPTE ST 424 compliant: 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; 3G-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 424 compliant: 1125(1080)/60p, 1125(1080)/50p; HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE ST 292 compliant: 750(720)/60p, 50(720)/50p, 1125(1035)/60i, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE ST 259 compliant: 525i(480i), 625i(576i) |
| Scanning Frequency (HDMI/DVI-D) | fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 25-162 MHz |
| Scanning Frequency (RGB) | fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower |
| Scanning Frequency YPBPR (YCBCR) | 525i(480i): fH 15.75 kHz; fV 60 Hz, 625i(576i): fH 15.63 kHz; fV 50 Hz, 525p (480p): fH 31.50 kHz; fV 60 Hz, 625p(576p): fH 31.25 kHz; fV 50 Hz, 750 (720)/60p: fH 45.00 kHz; fV 60 Hz, 750(720)/50p: fH 37.50 kHz; fV 50 Hz, 1125(1035)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/60i: fH 33.75 kHz; fV 60 Hz, 1125(1080)/50i: fH 28.13 kHz; fV 50 Hz, 1125(1080)/25p: fH 28.13 kHz; fV 25 Hz, 1125(1080)/24p: fH 27.00 kHz; fV 24 Hz, 1125(1080)/24sF: fH 27.00 kHz; fV 48 Hz, 1125(1080)/30p: fH 33.75 kHz; fV 30 Hz, 1125(1080)/60p: fH 67.50 kHz; fV 60 Hz, 1125(1080)/50p: fH 56.25 kHz; fV 50 Hz |
| Scanning Frequency (Video/Svideo) | fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PALM/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PALN/SECAM] |
| Optical Axis Shift | Vertical: +50% (powered), horizontal: ±10% (powered); NOTE: Optical If using the ET-DLE030, the optical axis is fixed. axis shift function cannot be operated when used with the ET-DLE055. |
| Keystone Correction Range | Vertical ±40°(vertical ±30° with the ET-DLE055/DLE085/DLE105, vertical +5° with the ET-DLE030); When using only the KEYSTONE correction of the Geometric Adjustment function: Vertical ±40°, horizontal ±15°(vertical ±30° and horizontal ±15° with the ET-DLE055/DLE085/DLE105); When using the optional upgrade kit ET-UK20: Vertical ±45° and horizontal ±40°(vertical ±22° and horizontal ±15° with the ET-DLE055/DLE085/DLE105, vertical +5° with the ET-DLE030); When using both the KEYSTONE and CURVED corrections of the Geometric Adjustment function: Vertical ±20°, horizontal ±15°(vertical ±8° and horizontal ±8° with the ET-DLE055/DLE085/DLE105) |
| Instalación | Ceiling/floor, front/rear |
| Terminals SDI In | BNC x 1, 3G-SDI signal: SMPTE ST 424 compliant; HD-SDI signal: SMPTE ST 292 compliant; SD-SDI signal: SMPTE ST 259 compliant |
| Terminals HDMI In | HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz-162 MHz; NOTE: Compatible with non-interlaced signals only |
| Terminals DVI-D In | DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz -162 MHz; NOTE: Compatible with non-interlaced signals only. |
| Terminals RGB 1 In | BNC x 5 |
| Terminals RGB 1 In R, G, B | R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. |
| Terminals RGB 1 In Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
| Terminals RGB 1 In S-Video Signal | Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms |
| Terminals RGB 2 In | D-sub HD 15-pin (female) x 1 |
| Terminals RGB 2 In R, G, B | R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD, VD/SYNC: TTL, high impedance, positive/negative automatic; NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals |
| Terminals RGB 2 In Y, PB, PR (Y, CB, CR) | Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms |
| Terminals 3D Sync 1 In/Out | BNC x 1, 1.0 Vp-p, 75 ohms; Input: TTL, high impedance. Output: TTL, max. 10 mA |
| Terminals 3D Sync 2 Out | BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA |
| Terminals Video In | BNC x 1, 1.0 Vp-p, 75 ohms |
| Terminals Serial In | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals Serial Out | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) |
| Terminals Remoter 1 In | M3 jack x 1 for wired remote control |
| Terminals Remoter 1 Out | M3 jack x 1 for link control |
| Terminals Remoter 2 In | D-sub 9-pin (female) x 1 for external control (parallel) |
| Terminals LAN/DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25 MHz - 162 MHz; NOTE: Compatible with non-interlaced signals only. |
| Power Cord Length | 3.0 m (9 ft 10 in) |
| Cabinet Materials | Molded plastic |
| Dimensions (W x H x D) PT-DZ870K/DZ870W | 498 x 200 x 556 mm (19-19/32 x 7-7/8 x 21-7/8 inches) (with supplied lens) |
| Dimensions (W x H x D) PT-DZ870LK/DZ870LW | 498 x 200 x 513 mm (19-19/32 × 7-7/8 × 20-3/16 inches) (without lens) |
| Weight PT-DZ870K/DZ870W | Approx. 18.3 kg (40.3 lbs) (with supplied lens) |
| Weight PT-DZ870LK/DZ870LW | Approx. 17.6 kg (38.8 lbs) (without lens) |
| Operation Noise | 40 dB (dual lamp operation, LAMP MODE: NORMAL), 35 dB (dual lamp operation, LAMP MODE: ECO) |
| Temperatura de funcionamiento | 0 ℃ - 45 ℃ (32℉ - 113 ℉) |
| Operating Humidity | 10% - 80% (no condensation) |
| Tecnología | 1-Chip DLP |
| Note | Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. *1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal. *2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 Up to a total of ±55° during simultaneous horizontal and vertical correction. *4 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal) *5 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking). *6 With legs at shortest position. *7 Average value. May differ depending on models. *8 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan control is set to High Altitude mode (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) in High Altitude mode) when the projector is being used with Lamp Select set to Dual and Lamp Power set to High, the light output may be reduced approximately 20% to protect the projector. *9 Operation range differs depending on environments. |
